Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Morris guitar neck reset
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=54207		 Page 1 of 1
Author:  banjopicks [ Thu Jun 17, 2021 2:16 pm ]
Post subject:  Morris guitar neck reset
Does anyone here have experience with these Japanese guitars. I have a real nice sounding one I may purchase but it needs a neck reset. I wonder if they are dovetailed and what kind of glue they may have used.
Author:  Don Williams [ Fri Jun 18, 2021 2:05 pm ]
Post subject:  Re: Morris guitar neck reset
Morris? Japanese? I thought these were made in Vermont?
Author:  Colin North [ Fri Jun 18, 2021 2:41 pm ]
Post subject:  Re: Morris guitar neck reset
Don Williams wrote:
Morris? Japanese? I thought these were made in Vermont?

'fraid not - factory in Matsumoto, Nagano, Japan.
Author:  CarlD [ Fri Jun 18, 2021 3:09 pm ]
Post subject:  Re: Morris guitar neck reset
I bought one when building log homes in Japan in '89. It was a great guitar. Sold it to one of the other carpenters when I left. Sorry, don't know how the neck is attached though.
Author:  flemsmith [ Fri Jun 18, 2021 3:19 pm ]
Post subject:  Re: Morris guitar neck reset
Slight aside....There is (or was) a luthery school in Vermont with the same name. My favorite classical guitar has a Morris from Vermont label inside. It developed a crack, and I emailed asking about the finish before I cleated it. Got a nice answer back that it's lacquer. Roy
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/