Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

white golpeador for flamenco guitar
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=54196
Page 1 of 1

Author:  jshelton [ Tue Jun 08, 2021 9:29 am ]
Post subject:  white golpeador for flamenco guitar

I need to buy some 10-11 mil white plastic to cover some damage on the soundboard of a flamenco guitar. Anyone have suggestions for a supplier? I used to buy it at Tap Plastics but can't remember what it was called (type of plastic, etc.).

Author:  johnparchem [ Tue Jun 08, 2021 11:23 am ]
Post subject:  Re: white golpeador for flamenco guitar

White goleadors are common, is there a reason not to use white self-adhesive pickguard material? https://www.amazon.com/Musiclily-Acoustic-Pickguard-Material-Adhesive/dp/B01LEYIAX4/ref=pd_di_sccai_1/138-1077012-5435907?pd_rd_w=ZqzQo&pf_rd_p=c9443270-b914-4430-a90b-72e3e7e784e0&pf_rd_r=5E5JQ7DZ5ZHC1MN8BDWY&pd_rd_r=1a7f6fc6-dde2-4753-a63d-0a47cf5f8796&pd_rd_wg=MHC8s&pd_rd_i=B01LEYIAX4&psc=1

Author:  jshelton [ Tue Jun 08, 2021 11:36 am ]
Post subject:  Re: white golpeador for flamenco guitar

johnparchem wrote:

Appreciate your response but the stuff on Amazon is too thick. I prefer 10-11 mil and would like plain sheet or roll (no self adhesive). I know they are called golpeadores but thought it might be a puzzling word for most people. I'll probably be forced to buy the pre-shaped self adhesive type but I don't like them.

Author:  oval soundhole [ Thu Jun 10, 2021 8:20 pm ]
Post subject:  Re: white golpeador for flamenco guitar

this was the only white tap plate (or golpeador) I was able to find on google. The shop is in Belgium so shipping might be a big factor; try asking on the delcamp forum, I'm sure you'll get more responses

Tap plates are most often mylar btw.

https://www.lasonanta.com/flamenco-guit ... large-size

Author:  wbergman [ Thu Jun 10, 2021 8:39 pm ]
Post subject:  Re: white golpeador for flamenco guitar

Robbie O'Brien classes include one on golpeadores. If he does not notice your post, you might try contacting him directly with your question.

Author:  johnparchem [ Fri Jun 11, 2021 11:55 am ]
Post subject:  Re: white golpeador for flamenco guitar

jshelton wrote:
johnparchem wrote:

Appreciate your response but the stuff on Amazon is too thick. I prefer 10-11 mil and would like plain sheet or roll (no self adhesive). I know they are called golpeadores but thought it might be a puzzling word for most people. I'll probably be forced to buy the pre-shaped self adhesive type but I don't like them.


Yes I see, the ones I suggested were 30 mil. I wonder about a roll of ABS film https://www.polymerfilms.com/product/abs/ Tough stuff including impact.

Author:  Clay S. [ Thu Jun 24, 2021 6:26 pm ]
Post subject:  Re: white golpeador for flamenco guitar

Hi John,
I measured the white plastic sheet I have - it is .020". If it would be of any use to you let me know.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/