| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| PSA, good straight edge, good price. http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=54104 |
Page 1 of 1 |
| Author: | Colin North [ Sat Apr 17, 2021 12:04 pm ] |
| Post subject: | PSA, good straight edge, good price. |
No affiliation. Maybe someone in UK could use one? Aluminium, aircraft grade, £29.99, 965mm, flat to within 0.04mm over its entire length. Checked mine and it's inside that spec. https://www.rutlands.com/sp+measuring-rules-straight-edges-precision-aluminium-straight-edge-with-metric-scale-965mm-rutlands+r9031?utm_campaign=Googlebase&utm_medium=organic&utm_source=Googlebase&geoip=GB&gclid=CjwKCAjwjuqDBhAGEiwAdX2cjzqbMUaOF2MLaqPlMpmXB98gv9GxNk_O0FUmDssdllrAw8s6QN8aABoCY-YQAvD_BwE#nogo |
|
| Author: | Barry Daniels [ Sat Apr 17, 2021 9:07 pm ] |
| Post subject: | Re: PSA, good straight edge, good price. |
I recently bought a new straightedge based on a recommendation by someone here but forgot who. It is a near copy of the straightedge I bought as the first tool specific for guitar repair, back a few years ago. It is a steel, imperial inch graduated, 18" long machinists rule that is about .1 " thick so it will stand on edge on frets. This company sells blemished seconds on the bay. I have bought two and the blemishes are minor and cosmetic. https://www.ebay.com/itm/Blem-Cosmetic-Second-PEC-18-4R-Combination-Square-Blade-fits-Starrett-Mitutoyo/151441107417 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|