| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Thin strip tablesaw jig. http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=53897 |
Page 1 of 1 |
| Author: | Darrel Friesen [ Tue Jan 26, 2021 2:46 pm ] |
| Post subject: | Thin strip tablesaw jig. |
Drew Fisher has some pretty interesting youtube videos. The first jig in this video is for cutting thin strips consistently. A couple of modifications and making it longer with another hold down or two and a featherboard would likely work well for bindings. I realize there are many other ways and jigs but this one caught my eye. https://youtu.be/pZfyoh5SZ6I |
|
| Author: | Ruby50 [ Thu Jan 28, 2021 8:17 am ] |
| Post subject: | Re: Thin strip tablesaw jig. |
I found the same idea and made it long enough for fretboard bindings with the same idea for a longer one for body bindings that I haven't mad yet. It works great and mine was easier to make. Ed M |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|