2.5mm drill bit (or 3/32") will get you .5" to .55" string height at the saddle with a .25" thick fretboard and .04" fret height.
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| When setting up for neck angle jig http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=53115 |
Page 1 of 1 |
| Author: | SnowManSnow [ Thu Apr 16, 2020 10:50 am ] |
| Post subject: | When setting up for neck angle jig |
I’m setting up for another Neck angle jig job. I’ve been using a spacer that is 3.5 mm tall to place at the bridge to set the angle. It’s what I’ve always done. Is that pretty standard? It gives me the 1.5 deg pitch, but I wanted to double check:) Sent from my iPhone using Tapatalk |
|
| Author: | James Orr [ Thu Apr 16, 2020 4:16 pm ] |
| Post subject: | Re: When setting up for neck angle jig |
2.5mm drill bit (or 3/32") will get you .5" to .55" string height at the saddle with a .25" thick fretboard and .04" fret height.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|