| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Martin Peghead Template http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=52874 |
Page 1 of 1 |
| Author: | Mike OMelia [ Fri Jan 31, 2020 11:48 am ] |
| Post subject: | Martin Peghead Template |
Looking for a template, with measurements, hole locations for a Martin-type peghead. Great if its in sketchup. D-28, or J40 fine. Thank you! |
|
| Author: | bluescreek [ Fri Jan 31, 2020 1:12 pm ] |
| Post subject: | Re: Martin Peghead Template |
ask and you shall receive |
|
| Author: | meddlingfool [ Fri Jan 31, 2020 1:40 pm ] |
| Post subject: | Re: Martin Peghead Template |
I think stew Mac has an acrylic template with holes and nut slot. Pretty sure that's where I got mine... |
|
| Author: | Mike OMelia [ Fri Jan 31, 2020 3:35 pm ] |
| Post subject: | Re: Martin Peghead Template |
Thank you! I have it all coded up in sketchup now. |
|
| Author: | Tai Fu [ Wed Feb 05, 2020 12:27 pm ] |
| Post subject: | Re: Martin Peghead Template |
I lasered one out.. makes things easier than trying to guess the dimensions. Took about 10 minutes to make it up in CorelDraw. |
|
| Author: | Mike OMelia [ Sat Feb 15, 2020 3:07 pm ] |
| Post subject: | Re: Martin Peghead Template |
Tai, not sure what u mean. I draw my templates in Sketchup. Set printing to scale. Print it, cut it out and glue to peghead. Sanding shape to outline. Fairly certain this is a common practice. |
|
| Author: | dofthesea [ Sat Feb 15, 2020 6:45 pm ] |
| Post subject: | Re: Martin Peghead Template |
LMI has them on sale right now for free shipping at $8 |
|
| Author: | Tai Fu [ Sat Feb 15, 2020 8:05 pm ] |
| Post subject: | Re: Martin Peghead Template |
Mike OMelia wrote: Tai, not sure what u mean. I draw my templates in Sketchup. Set printing to scale. Print it, cut it out and glue to peghead. Sanding shape to outline. Fairly certain this is a common practice. I have a laser engraver. I draw it up in Corel Draw and then the laser makes a template for me. No sanding or trying to get a curve right without bumps... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|