Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Wordless Workshop Something I've never done.
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=52552		 Page 1 of 1
Author:  Ken Nagy [ Tue Oct 15, 2019 1:35 pm ]
Post subject:  Wordless Workshop Something I've never done.
Never did this before. So I made it up. Naturally the last photo was way out of focus so I had to do it over.

Attachment:
20191015_133656.jpeg


Attachment:
20191015_134004.jpeg


Attachment:
20191015_134055.jpeg


Attachment:
20191015_134302.jpeg


Attachment:
20191015_142047.jpeg
Author:  Colin North [ Tue Oct 15, 2019 2:01 pm ]
Post subject:  Re: Wordless Workshop Something I've never done.
I find these handy if you are opening up tuner holes.
https://www.amazon.com/Great-Planes-Precision-Standard-Propeller/dp/B001G8VUYK/ref=sr_1_fkmr2_2?keywords=stepped+reamer+imperial&qid=1571166001&sr=8-2-fkmr2
Author:  cablepuller1 [ Wed Oct 16, 2019 3:11 am ]
Post subject:  Re: Wordless Workshop Something I've never done.
Colin North wrote:
I find these handy if you are opening up tuner holes.
https://www.amazon.com/Great-Planes-Precision-Standard-Propeller/dp/B001G8VUYK/ref=sr_1_fkmr2_2?keywords=stepped+reamer+imperial&qid=1571166001&sr=8-2-fkmr2
Hi Colin, link wouldn't open, was interested to see what you use, thanks

Sent from my SM-G960F using Tapatalk
Author:  Colin North [ Wed Oct 16, 2019 3:40 am ]
Post subject:  Re: Wordless Workshop Something I've never done.
Propeller reamer
Author:  Colin North [ Wed Oct 16, 2019 4:05 am ]
Post subject:  Re: Wordless Workshop Something I've never done.
You may have to be quick, I think they (Great Planes, the best I believe) may be out of production.
Author:  Joe Beaver [ Sat Oct 19, 2019 6:54 pm ]
Post subject:  Re: Wordless Workshop Something I've never done.
Thanks for the tip Colon. I just ordered one. I think it should work well for some bushing style tuners I have that need a 8mm ream.
Author:  Colin North [ Sun Oct 20, 2019 4:02 am ]
Post subject:  Re: Wordless Workshop Something I've never done.
Joe Beaver wrote:
Thanks for the tip Colon. I just ordered one. I think it should work well for some bushing style tuners I have that need a 8mm ream.

Hi Joe, you're welcome, I use them for the stepped tuner holes, and a tapered reamer for press fit bushings.
Hope it works well for you.
Mind you, I've been called a lot of things in my time, but that has not really been among them until now.
I've been called an a**hole, which is pretty close, but not a Colon. laughing6-hehe
Probably auto spellchecker has something against me. pfft
Author:  doncaparker [ Sun Oct 20, 2019 7:25 am ]
Post subject:  Re: Wordless Workshop Something I've never done.
When you engage in deep introspection, you can call it a Colinoscopy.
Author:  Colin North [ Sun Oct 20, 2019 1:02 pm ]
Post subject:  Re: Wordless Workshop Something I've never done.
doncaparker wrote:
When you engage in deep introspection, you can call it a Colinoscopy.

I already do.... :lol:
Author:  Joe Beaver [ Sun Oct 20, 2019 4:58 pm ]
Post subject:  Re: Wordless Workshop Something I've never done.
Sorry Colin, a slight slip of the not so nimble fingers. After all, they are soooo close on the keyboard.....and did I mention my eyes?
Author:  Colin North [ Mon Oct 21, 2019 5:47 am ]
Post subject:  Re: Wordless Workshop Something I've never done.
No worries at all Joe.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/