| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| New Luthier Tips du Jour video - LMI Bridge Drill jig http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=51525 |
Page 1 of 1 |
| Author: | Robbie O'Brien [ Mon Jan 28, 2019 11:37 am ] |
| Post subject: | New Luthier Tips du Jour video - LMI Bridge Drill jig |
Here is the latest Luthier Tips du Jour video. - In this video I show how to drill six bridge holes in a straight line using the LMI Bridge Drill Jig. This is the old version of this jig. They now have a new and improved version. This video as well as all my other videos are available via my website, http://www.obrienguitars.com/videos , LMI's website or on youtube. |
|
| Author: | Colin North [ Mon Jan 28, 2019 11:43 am ] |
| Post subject: | Re: New Luthier Tips du Jour video - LMI Bridge Drill jig |
Hmm, a cross slide vise is infinitely adjustable, covers any spread at the bridge and you can angle the bridge pin holes. Just sayin'... |
|
| Author: | LarryH [ Mon Jan 28, 2019 12:06 pm ] |
| Post subject: | Re: New Luthier Tips du Jour video - LMI Bridge Drill jig |
Thanks Robbie, as always, for taking the time to post your tips... |
|
| Author: | Robbie O'Brien [ Mon Jan 28, 2019 12:07 pm ] |
| Post subject: | Re: New Luthier Tips du Jour video - LMI Bridge Drill jig |
LarryH wrote: Thanks Robbie, as always, for taking the time to post your tips... Thank you Larry! |
|
| Author: | Clay S. [ Mon Jan 28, 2019 12:25 pm ] |
| Post subject: | Re: New Luthier Tips du Jour video - LMI Bridge Drill jig |
If you are only concerned with keeping the holes in a straight line you can do that by clamping a fence on the table of the drill press. The jig helps you maintain the same distance between holes as well. |
|
| Author: | SnowManSnow [ Mon Jan 28, 2019 2:54 pm ] |
| Post subject: | Re: New Luthier Tips du Jour video - LMI Bridge Drill jig |
Thanks Robbie. Always appreciated Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|