Found this little fellow under the tree with my name on it
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| So, was Santa good to you too? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=51368 |
Page 1 of 1 |
| Author: | Colin North [ Tue Dec 25, 2018 11:14 am ] |
| Post subject: | So, was Santa good to you too? |
Found this little fellow under the tree with my name on it
|
|
| Author: | SteveSmith [ Tue Dec 25, 2018 11:52 am ] |
| Post subject: | Re: So, was Santa good to you too? |
I have one of those and it is definitely one of my favorites. For Christmas I got permission to do some upgrades around the shop - woo hoo. |
|
| Author: | bcombs510 [ Tue Dec 25, 2018 12:21 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
Got the parts to make a downdraft table. I got it (and built it) last night. It’s a little taller than normal because of the 6” dust port, but works great.  But here is what it’s really all about... the boy putting together his droid while wearing his new coat indoors.   Hope everyone has a great day! Sent from my iPhone using Tapatalk Pro |
|
| Author: | Pmaj7 [ Tue Dec 25, 2018 2:05 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
Colin and Steve, which model is that? New username, same Pat Mac |
|
| Author: | johnparchem [ Tue Dec 25, 2018 2:14 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
 Attachment: xmas.jpg
|
|
| Author: | SteveSmith [ Tue Dec 25, 2018 2:24 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
Pmaj7 wrote: Colin and Steve, which model is that? If it is what I think it is then it's a LN Violin Makers plane
New username, same Pat Mac |
|
| Author: | Colin North [ Tue Dec 25, 2018 2:56 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
Mine is a Quangsheng Luban 101, similar to the LN. |
|
| Author: | Ruby50 [ Tue Dec 25, 2018 3:16 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
I got the L-V grinder jig for grinding plane and chisel bevels, and 2 big diamond plates (and some chocolate). No underwear this year. Ed |
|
| Author: | SnowManSnow [ Tue Dec 25, 2018 3:33 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
Scored a 2 Cherries curves chisel for scalloping and that nifty stewmac vice for holding bridges and such.  Sent from my iPhone using Tapatalk |
|
| Author: | George L [ Tue Dec 25, 2018 3:35 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
We had a great dinner with family last night and a wonderful morning exchanging gifts with our daughter. No tools under the tree for me this year but I did receive a nice belt, which I needed because my old belts no longer fit me--they're too big!
|
|
| Author: | Bryan Bear [ Tue Dec 25, 2018 10:17 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
I got one of these Iwasaki rasp/file things. I tried one out at woodcraft a while ago and really liked it. Its teeth aren’t really like a rasp or a file, it is almost like a float. It takes a minute to get used to a good angle of attack but it removes hardwood faster than my rasp and leaves a much smoother surface. Shaping heels and volutes just got a whole lot faster. Note: thos is a small curved file not as big as a cabinet rasp. https://www.woodcraft.com/products/iwas ... e-fine-cut |
|
| Author: | olmorton71 [ Tue Dec 25, 2018 11:02 pm ] |
| Post subject: | Re: So, was Santa good to you too? |
I  Very good Sent from my iPhone using Tapatalk |
|
| Author: | Clinchriver [ Wed Dec 26, 2018 9:32 am ] |
| Post subject: | Re: So, was Santa good to you too? |
Very very nice! Allen Accomplice Head, 22 watts of magic 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|