Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Ryan - Advanced Shell A5 Kerfed Linings
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=51308		 Page 1 of 1
Author:  Paul Burner [ Tue Dec 04, 2018 5:30 pm ]
Post subject:  Ryan - Advanced Shell A5 Kerfed Linings
It appears that the A5 Kerfed Linings have changed in length and possibly material. Does anyone know about this?

I need to know how much to order for a dreadnaught size guitar - and I can't get a response via email and they don't seem to answer the phone and voicemail is full.

Does anyone know if 1 "set" is enough for a guitar?

Seems odd that I can't get through to them.

Thanks
Author:  utarazo [ Tue Dec 04, 2018 6:30 pm ]
Post subject:  Re: Ryan - Advanced Shell A5 Kerfed Linings
I talked to barb a little over a month ago, the new kerf lining comes in shorter pieces but one set will still be enough for a full guitar.

I know they were backed up a bit in the production of the kerf linings and doing shows and such, probably explains why you can't get a hold of them?!

Jonathan
Author:  Paul Burner [ Tue Dec 04, 2018 6:34 pm ]
Post subject:  Re: Ryan - Advanced Shell A5 Kerfed Linings
utarazo wrote:
I talked to barb a little over a month ago, the new kerf lining comes in shorter pieces but one set will still be enough for a full guitar.

I know they were backed up a bit in the production of the kerf linings and doing shows and such, probably explains why you can't get a hold of them?!

Jonathan



Thanks - that is all I needed to know.
Author:  SteveSmith [ Tue Dec 04, 2018 7:20 pm ]
Post subject:  Re: Ryan - Advanced Shell A5 Kerfed Linings
I've wanted to try some for a while so I just did a square shoulder dred with one set. Had 1 strip plus a bit left over.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/