| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| UV finishing, how I do it http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=51237 |
Page 1 of 1 |
| Author: | B. Howard [ Sat Nov 17, 2018 3:21 pm ] |
| Post subject: | UV finishing, how I do it |
As mentioned in another thread here is my tutorial on UV finishing for guitars. And hey, if you contact any of the suppliers I mention tell em ya heard about it from me! https://howardguitars.blogspot.com/2018/11/uv-cured-finishing-for-guitars.html |
|
| Author: | nkforster [ Sat Nov 17, 2018 6:12 pm ] |
| Post subject: | Re: UV finishing, how I do it |
Very decent of you to share Brian. |
|
| Author: | J De Rocher [ Sun Nov 18, 2018 5:04 pm ] |
| Post subject: | Re: UV finishing, how I do it |
Thanks for taking the time to do such a thorough write up and sharing it. There's enough how to information there that I could actually consider trying it. Completing the finishing process in just one day is a huge attraction. I haven't been able to find cost information about the UV system you are using. What's a ballpark price for it? What sealer and pore filler products are you using in this method? |
|
| Author: | LarryH [ Sun Nov 18, 2018 11:42 pm ] |
| Post subject: | Re: UV finishing, how I do it |
nkforster wrote: Very decent of you to share Brian. +1 |
|
| Author: | Joe Beaver [ Mon Nov 19, 2018 12:34 am ] |
| Post subject: | Re: UV finishing, how I do it |
Howard, That is a great source of solid information. Thank you for sharing. |
|
| Author: | B. Howard [ Mon Nov 19, 2018 8:02 am ] |
| Post subject: | Re: UV finishing, how I do it |
J De Rocher wrote: Thanks for taking the time to do such a thorough write up and sharing it. There's enough how to information there that I could actually consider trying it. Completing the finishing process in just one day is a huge attraction. I haven't been able to find cost information about the UV system you are using. What's a ballpark price for it? What sealer and pore filler products are you using in this method? Assuming you have a decent spray set up already adding UV curing will cost about $2000 as a minimum buy in for equipment and materials. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|