| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| SURVEY 2: M&T Hardware http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=51193 |
Page 1 of 1 |
| Author: | Chris Ensor [ Mon Nov 05, 2018 10:35 am ] |
| Post subject: | SURVEY 2: M&T Hardware |
Thanks for the replies on my other survey. For those who use barrel nuts (also called cross dowel nuts or dowel nuts) what diameter are you using? Thanks. |
|
| Author: | J De Rocher [ Mon Nov 05, 2018 12:02 pm ] |
| Post subject: | Re: SURVEY 2: M&T Hardware |
diameter = 3/8" |
|
| Author: | Michaeldc [ Mon Nov 05, 2018 12:34 pm ] |
| Post subject: | Re: SURVEY 2: M&T Hardware |
10mm X 20mm |
|
| Author: | Joe Beaver [ Mon Nov 05, 2018 3:11 pm ] |
| Post subject: | Re: SURVEY 2: M&T Hardware |
I'm the same as Michael, 10mm x 20mm |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|