Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

New Luthier Tips du Jour video - Crackle finish
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=50480
Page 1 of 1

Author:  Robbie O'Brien [ Mon Apr 02, 2018 8:31 am ]
Post subject:  New Luthier Tips du Jour video - Crackle finish

Here is the latest Luthier Tips du Jour video - In this video I talk with Brazilian luthier, Marcos Zaganin about how to achieve a crackle type finish on an electric guitar. This video as well as all my other videos are available via my website, http://www.obrienguitars.com/videos , LMI's website or on youtube.


Author:  Chris Pile [ Mon Apr 02, 2018 9:06 am ]
Post subject:  Re: New Luthier Tips du Jour video - Crackle finish

Gee.... I did a couple of those back in the 80's. I shot the base coat in lacquer, and after it cured I would spray the top coat in rattle can enamel. Before it dried, I would hit it with a thin burst of clear lacquer which would make it crack. Let it dry well, and then begin adding lots of clear to smooth out the build a bit before sanding level. It was more work than a normal lacquer finish. This method looks easier.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/