| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Santa Cruz Tony Rice neck dimensions and contours needed http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=50421 |
Page 1 of 1 |
| Author: | TRein [ Tue Mar 13, 2018 4:46 pm ] |
| Post subject: | Santa Cruz Tony Rice neck dimensions and contours needed |
A customer overseas has relayed to me that his favorite neck profile is a Santa Cruz Tony Rice. He describes it as a slim, v neck. I know it is a long shot but thought I'd ask the OLF if anybody has info on this neck profile. |
|
| Author: | Casey Cochran [ Tue Mar 13, 2018 6:33 pm ] |
| Post subject: | Re: Santa Cruz Tony Rice neck dimensions and contours needed |
I recently built an OM for a guy who brought his TR to match the neck profile. I'm sure my templates are not exact, but he was happy with the guitar. How about I email/text you a photo that you could scale with your printer? |
|
| Author: | TRein [ Tue Mar 13, 2018 7:07 pm ] |
| Post subject: | Re: Santa Cruz Tony Rice neck dimensions and contours needed |
Casey, That sounds great. I'll PM my email address |
|
| Author: | TRein [ Wed Mar 14, 2018 5:51 am ] |
| Post subject: | Re: Santa Cruz Tony Rice neck dimensions and contours needed |
Casey very kindly sent a pic of the contours, which will give me a starting point for the shape of the neck. If anyone has the dimensions of neck thickness at the 1st and 10th that would complete the picture. By thickness I mean the dimension between the top of the fingerboard (not including fretwire) and back of the neck. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|