| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Anyone have experience with Schaller Grandtune? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=50407 |
Page 1 of 1 |
| Author: | Joe Beaver [ Sat Mar 10, 2018 11:07 pm ] |
| Post subject: | Anyone have experience with Schaller Grandtune? |
I am thinking about offering an open back tuner on my steel strings. I'll include Waverly's also for those that must have them but I'm not a big fan. I've always leaned toward gotoh. They offer a nice open backed but I do like the look of the Schallers What do you think of the Schaller Grandtune open backed tuners? |
|
| Author: | Chris Pile [ Sun Mar 11, 2018 12:18 am ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
I was unaware of this model, but it's a Schaller - and it's hard to badmouth that brand. Looks nice, too. |
|
| Author: | Woodie G [ Sun Mar 11, 2018 6:06 am ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
We have installed them, and those customers that have used them for a few years have not reported anything other than pleasant experiences with the product. There are some threads on Unofficial Martin Guitar Forum that cover Grand Tune virtues and any vices in detail, including some early adopter's trials with base plate cracks between base and mounting 'ears' for the tuner shafts, but those issues appear to be resolved. The only other issue that I see is the logo marking is rather non-traditional in a style of tuner which is usually used on more traditionally styled instruments. At over $100 per pair for the Grand Tunes, we've found our customers usually prefer the slightly more expensive Waverly tuners. |
|
| Author: | B. Howard [ Sun Mar 11, 2018 8:33 am ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
These are just as smooth as the Waverly. Anything Schaller is always top notch and these are their top shelf. |
|
| Author: | meddlingfool [ Sun Mar 11, 2018 12:12 pm ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
I really like them, and the variety of cosmetics available, but I usually go for the cheaper gotoh or Grover's. but they're excellent tuners. |
|
| Author: | Joe Beaver [ Sun Mar 11, 2018 2:25 pm ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
Thanks for all the nice comments. I went ahead and ordered a set. |
|
| Author: | Ken Franklin [ Mon Mar 12, 2018 2:01 am ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
I ordered some of their Grand Tune tuners direct from the factory and was able to get a significant discount. +1 for number of options. |
|
| Author: | Joe Beaver [ Mon Mar 12, 2018 12:36 pm ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
Ken, did you have to setup an account to get that? |
|
| Author: | Pmaj7 [ Thu Mar 15, 2018 11:59 pm ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
Yeah, I'd be interested to get the skinny on that discount too! Just for Builders with tax ID? Minimum quantity? |
|
| Author: | Ken Franklin [ Fri Mar 16, 2018 3:27 am ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
Joe Beaver wrote: Ken, did you have to setup an account to get that? I don't remember any minimums. I sent an email explaining that I was a luthier and wanted information about ordering direct. They emailed a price list and a descriptive brochure of the products. I included a link to my website. This was two years ago. |
|
| Author: | Joe Beaver [ Fri Mar 16, 2018 2:17 pm ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
Thank you Ken. I'll give that a try. |
|
| Author: | mountain whimsy [ Tue Apr 17, 2018 9:42 am ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
As per Ken's suggestion, I contacted Schaller to see about ordering direct. They couldn't have been more helpful. They'll send you a product list with prices. You just email them what you want and they'll send you a total to pay via PayPal. I got my first order about 10 days after ordering. The prices are below US market prices, even with the shipping. And you get a much broader selection of finishes, buttons, etc. As for quality, I'm very pleased. I haven't used Waverly guitar tuners, but I assume they are like their Uke tuners. The Schaller Grand Tunes seem to be much better built, crisper lines, the frame appears either milled or cast (not bent like the Waverly's), and very smooth turning. I got two sets. A standard solid headstock post in black with snakewood buttons. And a vintage copper with ebony buttons for a slotted headstock. Both look great! |
|
| Author: | bcombs510 [ Tue Apr 17, 2018 10:31 am ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
I was looking at these: https://schaller.info/en/m6-series/272/m6-pin I can't tell from the instructions, do the pins just bite into the headstock as the nut is tightened? I like the look of these! |
|
| Author: | Terence Kennedy [ Tue Apr 17, 2018 6:28 pm ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
For those that have used them, are they as sensitive to post bushing alignment as Waverlys? I still have issues with tight tuners even when I think everything is aligned just right. |
|
| Author: | Woodie G [ Wed Apr 18, 2018 6:51 am ] |
| Post subject: | Re: Anyone have experience with Schaller Grandtune? |
The M6 Pin tuners require the pin holes to be pre-drilled. The Stewmac #4857 Tuner Pin Drill Jig saves some time when doing this, as well as gets the alignment correct. Dr. Kennedy: None of the traditional open-back tuners we have installed (Gotoh, Hipshot, Grover, Schaller, and Waverly) appear to be any more or less immune to the alignment issues arising from using press-fit bushings as the tuner shaft's top support. Grovers seem to lose any stiffness in function earlier than the other brands noted, but also quickly become a bit loose in feel - but not to the point where tuning stability is affected if the 'tune UP' rule is followed. The benefit of the bushings versus screw-down tuner mounting continues to be that press-fit bushings do not transfer any significant load to the finish, so the sort of 'cats-eye' lacquer separations below the tuner posts seen on some Martins and a number of older Gibsons are avoided. We have been using the Hipshot and Schertler open back tuners for a few years on instruments where the sleeker, more modern look is preferred, and find them equivalent to other quality tuning machines. The current stock tuners on new instruments are Waverly and Schertler for open back tuners and Gotoh for sealed units. The return and replacement policy for any tuner order placed with Stewart-MacDonald is a compelling argument...we've received replacements the next business morning where we had an artist that needed them for a performance that evening...all at no cost to the customer or our shop. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|