| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| 12 string bridge width http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=50142 |
Page 1 of 1 |
| Author: | Colin North [ Thu Jan 04, 2018 2:59 pm ] |
| Post subject: | 12 string bridge width |
So, how wide would you make a 12 string bridge? With 2 sets of pins, the separation they would need, plus the extra tension, what are we looking at from front to back of the bridge? |
|
| Author: | Pmaj7 [ Thu Jan 04, 2018 8:49 pm ] |
| Post subject: | Re: 12 string bridge width |
I just did a 1x6 with six pins. No rabbet. I don't know if there's any hard data on this type of thing. I was pretty confident with my joint and taking all the other factors into account went for it. So far so good! |
|
| Author: | Freeman [ Thu Jan 04, 2018 11:08 pm ] |
| Post subject: | Re: 12 string bridge width |
My Stella clone pyramid bridge is 1 x 6-1/4 with no pins (tailpiece). My OM belly bridge is 1-28/32 x 6-1/4 with twelve pins. The one set of plans (that are sort of a combination Guild and Taylor jumbo) look to be 1-27/32 x 6-13/16 with 12 pins. I could go measure my D12-28 but I'll bet its close to the OM. I've also got a 12 string bridge that I picked up somewhere out in the shop - I think its Guild profile - I can measure that one too. |
|
| Author: | Colin North [ Fri Jan 05, 2018 8:19 am ] |
| Post subject: | Re: 12 string bridge width |
pat macaluso wrote: I just did a 1x6 with six pins. No rabbet. I don't know if there's any hard data on this type of thing. I was pretty confident with my joint and taking all the other factors into account went for it. So far so good! Brave man! |
|
| Author: | Pmaj7 [ Fri Jan 05, 2018 11:34 am ] |
| Post subject: | Re: 12 string bridge width |
Colin North wrote: pat macaluso wrote: I just did a 1x6 with six pins. No rabbet. I don't know if there's any hard data on this type of thing. I was pretty confident with my joint and taking all the other factors into account went for it. So far so good! Brave man! |
|
| Author: | Haans [ Fri Jan 05, 2018 5:39 pm ] |
| Post subject: | Re: 12 string bridge width |
I made my pyramid 12's at about 6-1/2 to 6-3/4 x 1-3/8 to 1-1/2". |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|