Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
Just Finished WRC\Cocobolo Falcate braced 00 steel string http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=50121 |
Page 1 of 1 |
Author: | johnparchem [ Sun Dec 31, 2017 8:21 pm ] |
Post subject: | Just Finished WRC\Cocobolo Falcate braced 00 steel string |
I finished this guitar. Falcate braced western red cedar top Cocobolo back and sides Australian blackwood bindings Brazilian Rosewood bridge and headstock veneer Post Catalyzed Royal Lac finish You can hear it, sorry about my playing. |
Author: | bcombs510 [ Sun Dec 31, 2017 8:24 pm ] |
Post subject: | Just Finished WRC\Cocobolo Falcate braced 00 steel string |
It’s a beauty, John! The top is great. How did you apply the post cat royal lac? Is that your first instrument with it? Happy New Year! Sent from my iPhone using Tapatalk |
Author: | Pmaj7 [ Sun Dec 31, 2017 8:59 pm ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
She's a looker! |
Author: | bcombs510 [ Sun Dec 31, 2017 11:28 pm ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
BTW: My son will get a real kick out of the weeping angel! Sent from my iPhone using Tapatalk |
Author: | Alex Kleon [ Mon Jan 01, 2018 9:09 am ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Nicely done, John! Looks and sounds great! Alex |
Author: | jfmckenna [ Mon Jan 01, 2018 9:15 am ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Looks and sounds great John. The wood choices are beautiful together. I'm curious about Royal Lac too. Been interested in it for a while now but have yet to try it. |
Author: | sdsollod [ Mon Jan 01, 2018 12:19 pm ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Really nice John! |
Author: | DannyV [ Mon Jan 01, 2018 2:03 pm ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Beautiful John! |
Author: | meddlingfool [ Mon Jan 01, 2018 8:38 pm ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Nicely done! I've yet to get to a falcate top... |
Author: | SteveSmith [ Fri Jan 05, 2018 9:52 am ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Nice John - love the back! |
Author: | Joe Beaver [ Fri Jan 05, 2018 12:53 pm ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Beautiful John. And the Angel seems to love it also. I am also interested in the finish process you used. Pore filler? Spray? Impressions? |
Author: | George L [ Fri Jan 05, 2018 1:59 pm ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Well done, John. That's a nice guitar. |
Author: | johnparchem [ Fri Jan 05, 2018 2:37 pm ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Joe Beaver wrote: Beautiful John. And the Angel seems to love it also. I am also interested in the finish process you used. Pore filler? Spray? Impressions? I used zpoxy pore fill sealed with seal-lac. I am spraying the post catalyzed Royal-Lac I love its look and it does buff out well. The down sides I have found for an inexperienced finisher is that once cured I could not successfully touch up issues without witness lines. I hand a sand through on the back late in the process. I touched it up with a air brush, a nice clean over spray touch up. After that cured once level and buffed I could always see the touch up. Ultimately I sanding down the whole back sealed with seal-lac and resprayed. That worked well. |
Author: | otherDoc [ Sun Jan 07, 2018 1:10 pm ] |
Post subject: | Re: Just Finished WRC\Cocobolo Falcate braced 00 steel strin |
Your playing sounds fine to me. And the guitar has good tone for picking. otherDoc |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |