| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Nut and barrel connectors http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=49896 |
Page 1 of 1 |
| Author: | SnowManSnow [ Fri Nov 03, 2017 6:24 am ] |
| Post subject: | Nut and barrel connectors |
I’m still working out some sources for regularly needed building supplies, and need to find a good place for the mortise and tenon barrels and bolts for bolt on connections. Lmi has these, but their shipping is kinda crazy, especially if you dont build a ton and only need a few connectors. Stewmac doesn’t carry them, that I can find (why?) Anyway.... where do you get yours? Thanks for the insight B Sent from my iPhone using Tapatalk Pro |
|
| Author: | Michaeldc [ Fri Nov 03, 2017 6:55 am ] |
| Post subject: | Re: Nut and barrel connectors |
I buy from these guys. https://shop.stafast.com M |
|
| Author: | bcombs510 [ Fri Nov 03, 2017 7:35 am ] |
| Post subject: | Re: Nut and barrel connectors |
Yeah, if you mean cross dowels when saying barrel connectors, I usually get those from Amazon or the local Ace Hardware. I've switched to hanger bolts on ukes and also using those on the next few guitars to see how they go. With a M/T joint the hanger bolt lets you really sink in the screw end deep, which gives me some peace of mind compared to have just a few 8ths of wood on the bottom side of the cross dowel. Probably overkill though I'm sure. 
|
|
| Author: | SnowManSnow [ Fri Nov 03, 2017 7:45 am ] |
| Post subject: | Re: Nut and barrel connectors |
bcombs510 wrote: Yeah, if you mean cross dowels when saying barrel connectors, I usually get those from Amazon or the local Ace Hardware. I've switched to hanger bolts on ukes and also using those on the next few guitars to see how they go. With a M/T joint the hanger bolt lets you really sink in the screw end deep, which gives me some peace of mind compared to have just a few 8ths of wood on the bottom side of the cross dowel. Probably overkill though I'm sure. Yes sir. That’s what I mean. With the kits I’ve built they all used hanger bolts. Sent from my iPhone using Tapatalk Pro |
|
| Author: | Bri [ Fri Nov 03, 2017 8:41 am ] |
| Post subject: | Re: Nut and barrel connectors |
Home depot has these in the bulk bin area. B |
|
| Author: | SnowManSnow [ Fri Nov 03, 2017 9:24 am ] |
| Post subject: | Nut and barrel connectors |
So I’m looking for barrel nut = 1/4-10mm 20mm length and matching bolt that is 1/4x20 x30mm Sent from my iPhone using Tapatalk Pro |
|
| Author: | Michaeldc [ Fri Nov 03, 2017 9:41 am ] |
| Post subject: | Re: Nut and barrel connectors |
SnowManSnow wrote: So I’m looking for barrel nut = 1/4-10mm 20mm length and matching bolt that is 1/4x20 x30mm Sent from my iPhone using Tapatalk Pro https://shop.stafast.com/cross-dowels |
|
| Author: | Terence Kennedy [ Fri Nov 03, 2017 10:09 am ] |
| Post subject: | Re: Nut and barrel connectors |
I get my barrel nuts and Furniture bolts at Ace. Look for furniture connectors in the wonderful aisles with all the little boxes. Spend some time there you will find all sorts of cool stuff for lutherie in those boxes. |
|
| Author: | Coach71 [ Fri Nov 03, 2017 11:20 am ] |
| Post subject: | Re: Nut and barrel connectors |
I've got a pile of these, can send you some. 1/4 x 10mm x 20mm zink plated. |
|
| Author: | Alex Kleon [ Fri Nov 03, 2017 11:31 am ] |
| Post subject: | Re: Nut and barrel connectors |
Home Depot and Lowes. Like Terence said, you might find lots of other stuff. Alex |
|
| Author: | meddlingfool [ Fri Nov 03, 2017 12:35 pm ] |
| Post subject: | Re: Nut and barrel connectors |
FWIW, I evolve out of the bolt on M&T to the butt joint. The tenon is a holdover from the dovetail. If you're using bolts, there is no real reason for a tenon at all. .02 |
|
| Author: | meddlingfool [ Fri Nov 03, 2017 12:52 pm ] |
| Post subject: | Re: Nut and barrel connectors |
In other words, beyond being the spot that holds the barrel nuts, the tenon has no actual purpose in the bolt on m&t. |
|
| Author: | J De Rocher [ Fri Nov 03, 2017 12:52 pm ] |
| Post subject: | Re: Nut and barrel connectors |
You may already be aware of this, but if you order barrel nuts online, make sure they are the kind that have the bolt hole centered. Some barrel nuts have the bolt hole offset toward one end. |
|
| Author: | SnowManSnow [ Fri Nov 03, 2017 5:16 pm ] |
| Post subject: | Re: Nut and barrel connectors |
meddlingfool wrote: In other words, beyond being the spot that holds the barrel nuts, the tenon has no actual purpose in the bolt on m&t. I’ve actually been looking for examples of this today. Sent from my iPhone using Tapatalk Pro |
|
| Author: | meddlingfool [ Fri Nov 03, 2017 5:35 pm ] |
| Post subject: | Re: Nut and barrel connectors |
I don't know about your search skills, but I did outline my process exactly in the build/repair section of the AGF not too long ago... |
|
| Author: | SnowManSnow [ Fri Nov 03, 2017 5:44 pm ] |
| Post subject: | Re: Nut and barrel connectors |
I found what I needed guys thanks for the insight. Also several folks messaged and offered to send me some.... thanks for the offers too! Very helpful thread for a new guy like me Sent from my iPhone using Tapatalk Pro |
|
| Author: | SnowManSnow [ Fri Nov 03, 2017 5:49 pm ] |
| Post subject: | Re: Nut and barrel connectors |
Michaeldc wrote: SnowManSnow wrote: So I’m looking for barrel nut = 1/4-10mm 20mm length and matching bolt that is 1/4x20 x30mm Sent from my iPhone using Tapatalk Pro https://shop.stafast.com/cross-dowels Thanks for the last link Sent from my iPhone using Tapatalk Pro |
|
| Author: | SnowManSnow [ Fri Nov 03, 2017 5:50 pm ] |
| Post subject: | Re: Nut and barrel connectors |
J De Rocher wrote: You may already be aware of this, but if you order barrel nuts online, make sure they are the kind that have the bolt hole centered. Some barrel nuts have the bolt hole offset toward one end. Yes sir. I did notice and ordered accordingly Sent from my iPhone using Tapatalk Pro |
|
| Author: | nathanpeirson [ Fri Nov 03, 2017 6:20 pm ] |
| Post subject: | Re: Nut and barrel connectors |
If you don't know about McMaster Carr, they are a great place for mechanical parts. https://www.mcmaster.com/ |
|
| Author: | meddlingfool [ Fri Nov 03, 2017 6:35 pm ] |
| Post subject: | Re: Nut and barrel connectors |
Here's mine... 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|