| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Osage Interest? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=49338 |
Page 1 of 1 |
| Author: | Chris Ensor [ Mon May 08, 2017 10:16 am ] |
| Post subject: | Osage Interest? |
I've had some inquires about where to get Osage Orange sets. I have a local supplier and I cut them into sets myself. On another forum I've started to get requests for sets. Is there any interest here for Osage Orange sets? They would be $100 each. |
|
| Author: | jfmckenna [ Mon May 08, 2017 2:10 pm ] |
| Post subject: | Re: Osage Interest? |
Yeah I would be interested in a set. |
|
| Author: | Alan Carruth [ Mon May 08, 2017 2:35 pm ] |
| Post subject: | Re: Osage Interest? |
It would be really nice to have somebody supplying this wood. I'd be in for some. |
|
| Author: | Tom Barton [ Mon May 08, 2017 4:15 pm ] |
| Post subject: | Re: Osage Interest? |
I'd take two sets. |
|
| Author: | Clinchriver [ Mon May 08, 2017 4:17 pm ] |
| Post subject: | Re: Osage Interest? |
I'd be interested in a set in the near future, need to finish some projects. |
|
| Author: | meddlingfool [ Mon May 08, 2017 5:38 pm ] |
| Post subject: | Re: Osage Interest? |
I'd be interested... |
|
| Author: | truckjohn [ Mon May 08, 2017 7:10 pm ] |
| Post subject: | Re: Osage Interest? |
I am interested in some well quartersawn stuff. I got some dead flat sawn from a fellow a few years back... Groan... That stuff is one crazy potato chip hydrometer... |
|
| Author: | mikemcnerney [ Mon May 08, 2017 7:13 pm ] |
| Post subject: | Re: Osage Interest? |
I'm interested & have a KCMO address |
|
| Author: | Dave Rickard [ Mon May 08, 2017 8:19 pm ] |
| Post subject: | Re: Osage Interest? |
Later on in the year I might be interested in a set or 2 |
|
| Author: | Chris Ensor [ Mon May 08, 2017 9:14 pm ] |
| Post subject: | Re: Osage Interest? |
It looks like there may be some real interest. The sets I've been able to come up with in the past are about 15 degrees or so off of quarter. I have had no problem with them. Of course I'll be looking for as quartered as possible. For those who are really serious about ordering sets, PM me. I'll likely be making a trip to dig through lumber this week or next. |
|
| Author: | Coach71 [ Tue May 09, 2017 1:41 pm ] |
| Post subject: | Re: Osage Interest? |
A few years ago I fortunately I was able to get a number of perfectly quartered sets in jumbo size. Could be talked out of a few sets though. |
|
| Author: | JimWomack [ Wed May 10, 2017 8:42 am ] |
| Post subject: | Re: Osage Interest? |
I'd be interested in a set or two. |
|
| Author: | Haans [ Wed May 10, 2017 5:38 pm ] |
| Post subject: | Re: Osage Interest? |
Nice Bandsaw, Jim! Make and age? |
|
| Author: | David J Fisher [ Wed May 17, 2017 4:01 pm ] |
| Post subject: | Re: Osage Interest? |
Yates american y20 snowflake (above) Guessing Mr. Hess. I'd be interested in a set if it looks right. Any pictures? |
|
| Author: | Chris Ensor [ Wed May 17, 2017 7:17 pm ] |
| Post subject: | Re: Osage Interest? |
David J Fisher wrote: Yates american y20 snowflake (above) Guessing Mr. Hess. I'd be interested in a set if it looks right. Any pictures? PM Sent |
|
| Author: | Jim Kirby [ Fri May 26, 2017 6:11 am ] |
| Post subject: | Re: Osage Interest? |
If there are any sets unaccounted for, I'd like to claim one. Jim |
|
| Author: | jfmckenna [ Fri May 26, 2017 7:20 am ] |
| Post subject: | Re: Osage Interest? |
Got mine in yesterday, thanks Chris. I've never worked with this stuff before. It's got such a neat color to it and the tap tone is nice and glassy. Cool stuff. I know this stuff grows in my area too, I should hunt some down some day. |
|
| Author: | Chris Ensor [ Fri May 26, 2017 7:32 am ] |
| Post subject: | Re: Osage Interest? |
Jim Kirby wrote: If there are any sets unaccounted for, I'd like to claim one. Jim PM Sent |
|
| Author: | Chris Ensor [ Fri May 26, 2017 7:34 am ] |
| Post subject: | Re: Osage Interest? |
jfmckenna wrote: Got mine in yesterday, thanks Chris. I've never worked with this stuff before. It's got such a neat color to it and the tap tone is nice and glassy. Cool stuff. I know this stuff grows in my area too, I should hunt some down some day. Glad it made it there. Osage works decently easily. I bent it around .080 with no issues. |
|
| Author: | Chris Ensor [ Tue May 30, 2017 9:55 pm ] |
| Post subject: | Re: Osage Interest? |
All guitar sets and binding are sold. What I have left (a flitch uke set and some head plates) are now in the classifieds. Thanks everyone and happy osage building. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|