| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| prebridge buff http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=31766 |
Page 1 of 1 |
| Author: | Bailey [ Thu Apr 07, 2011 8:28 am ] |
| Post subject: | prebridge buff |
Anyone ever do a buffing prior to gluing the bridge??? I'm sanded to 1500 and have had ever so slight final finish discrepancies next to the bridge on previous builds that have required a lot of extra work buffing near bridge with compounds.. Just figured I might try buffing the guitar top before gluing the bridge this time. Good or bad idea?????? Kent |
|
| Author: | Josh H [ Thu Apr 07, 2011 8:30 am ] |
| Post subject: | Re: prebridge buff |
I always buff the body before the bridge and neck go on. Josh |
|
| Author: | Dave Anderson [ Thu Apr 07, 2011 9:01 am ] |
| Post subject: | Re: prebridge buff |
Yes,a good idea to buff before the bridge and neck are glued on. I buff mine out before removing finish for the bridge. |
|
| Author: | meddlingfool [ Thu Apr 07, 2011 9:10 am ] |
| Post subject: | Re: prebridge buff |
Me too. Just be super careful when handling it after buffing. |
|
| Author: | Laurent Brondel [ Thu Apr 07, 2011 9:23 am ] |
| Post subject: | Re: prebridge buff |
Bailey wrote: Anyone ever do a buffing prior to gluing the bridge? This is standard procedure for steel strings.
|
|
| Author: | Hank Mauel [ Thu Apr 07, 2011 12:42 pm ] |
| Post subject: | Re: prebridge buff |
Always! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|