Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Strung up #2 Adi/Sycamore 00 Shortscale - The Butterfly GLS
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=31562		 Page 1 of 1
Author:  YJ John [ Tue Mar 22, 2011 8:15 am ]
Post subject:  Strung up #2 Adi/Sycamore 00 Shortscale - The Butterfly GLS
GLS is George Lucus Special. Paraphrasing George; "You don't finish a project, you walk away."
This was my second build, first scratch build. OK I chickened out at last minute on using my bridge. My slot was messy. So, I used a nice prepped Brazilian Rosewood Pyramid bridge I had on the shelf.
The Sycamore was rescued from a burn pile 3 years ago, Adi Top, Rock Maple neck - the profile is real fat for now, Kluson Tuners given to me by a friend that reps the company.
The first build took 51 weeks, this one 28 weeks including a much improved French Polish on this one. Still not what I would tout as pro, but much improved.
Right now I have the saddle and nut sitting very high. String spacing is to be determined. She plays nice. Great depth in tone with quick decay.
I am pleased over all. I can do a list 2 pages long on what I would do different or better. Including to NOT drive a Putty Knife through the sides :) But, the experience taught me to see the list.
What next? #3 is half finished and sold - A Mahogany/Lutz Dred, Florentine Cutaway (that part is done!), Dred. I chickened out and bought the neck from LMI. I wanted a nice Volute and didn't feel I could pull it off.
I am starting selections for #4 - a Indian Rosewood and ? Tenor Guitar. I am getting both sets of plans from Elderly. Any other advise on Tenors is welcome.
Soooooooooooooooooo hooked! See ya at A.S.I.A!

Image
I chickened out on the Cutaway and 12 fret in the orig. concept.
Image
Image
Image
Author:  Corky Long [ Tue Mar 22, 2011 9:26 am ]
Post subject:  Re: Strung up #2 Adi/Sycamore 00 Shortscale - The Butterfly GLS
Nice, John!!

Congratulations! Really nice finish - especially for a french polish. Love the sycamore.
Author:  gozierdt [ Tue Mar 22, 2011 10:21 am ]
Post subject:  Re: Strung up #2 Adi/Sycamore 00 Shortscale - The Butterfly GLS
Looks Great [:Y:]
Beautiful color combination, I'm going to have to try
Sycamore, I like using USA sourced woods.
Author:  Darryl Young [ Tue Mar 22, 2011 12:07 pm ]
Post subject:  Re: Strung up #2 Adi/Sycamore 00 Shortscale - The Butterfly GLS
Looking good John. What does she sound like? How thick is your top? (curious how thick with the carving for the soundhole).
Author:  Barry Daniels [ Tue Mar 22, 2011 2:58 pm ]
Post subject:  Re: Strung up #2 Adi/Sycamore 00 Shortscale - The Butterfly GLS
What's going on with the fret spacing near the 19th and 20th fret?
Author:  YJ John [ Tue Mar 22, 2011 6:50 pm ]
Post subject:  Re: Strung up #2 Adi/Sycamore 00 Shortscale - The Butterfly GLS
Barry Daniels wrote:
What's going on with the fret spacing near the 19th and 20th fret?

I thought it was to the plan for 24.75. I'll remeasure.
Author:  YJ John [ Tue Mar 22, 2011 7:00 pm ]
Post subject:  Re: Strung up #2 Adi/Sycamore 00 Shortscale - The Butterfly GLS
Darryl Young wrote:
Looking good John. What does she sound like? How thick is your top? (curious how thick with the carving for the soundhole).

Hi, .125 at its thickest. Where I did my texture I supported it behind with a series of biscuits.
Tone sounds good. Really good. I have the Nut and Saddle real high till she settles a week or so. It has a deep treble with a weaker bass. Some sustain with quick decay. I play a finger slide version of "Over the Rainbow". This may be my favorite guitar for that tune. Hotel California sounds very cool :D
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/