| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| How much EM6000 to order? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=31457 |
Page 1 of 1 |
| Author: | 000lover [ Fri Mar 11, 2011 10:16 pm ] |
| Post subject: | How much EM6000 to order? |
About how much is needed per guitar (body only, not neck)? |
|
| Author: | Alan [ Fri Mar 11, 2011 11:01 pm ] |
| Post subject: | Re: How much EM6000 to order? |
Unless you are going to be doing a lot of guitars in a short period of time, I would probably recommend just getting one gallon at a time. Just guessing, but I would think you might get 6 to 8 per gallon. |
|
| Author: | Mike OMelia [ Fri Mar 11, 2011 11:31 pm ] |
| Post subject: | Re: How much EM6000 to order? |
Just one gallon. Make sure you put like a half a cup aside in a jar with a lid. Leave the lid off for a few days so that it thickens up considerably. Then keep lid on. Use for drop fills. Mike |
|
| Author: | Barry Daniels [ Mon Mar 14, 2011 9:02 am ] |
| Post subject: | Re: How much EM6000 to order? |
A quart will be sufficient for several guitars. |
|
| Author: | jac68984 [ Mon Mar 14, 2011 9:35 am ] |
| Post subject: | Re: How much EM6000 to order? |
Barry Daniels wrote: A quart will be sufficient for several guitars. Yup. Depends on how many coats you spray or problems you run into, but a quart should do you for a couple bodies. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|