Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Weissenborn set
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=30932		 Page 1 of 1
Author:  slidinbob [ Mon Jan 31, 2011 5:12 pm ]
Post subject:  Weissenborn set
Hi,
someone of you can tell me where I can buy some hawaiian koa weissenborn set (plain -> master grade)?

thanks
Author:  Freeman [ Mon Jan 31, 2011 5:53 pm ]
Post subject:  Re: Weissenborn set
Try Bruce Crepes at Notable Woods. I just bought two very nice sets from him, air dried since 2006. He nested the two sets to minimize waste. They have been stickered in my shop for about 3 months now - getting ready to build with them.

(don't know if Bruce is a sponsor or if referencing him is a problem. If so you might just try each of the sponsors).

Also, just built a Weissenborn bending form for my Fox bender - we'll see how that works maybe this weekend.

edit to add, if there is any trouble shipping koa to you there is also a vendor in Australia who apparently can ship Blackwood (very similar to koa).
Author:  Ti-Roux [ Mon Jan 31, 2011 6:57 pm ]
Post subject:  Re: Weissenborn set
These are sponsors on the forum here. You can't miss them. Check out Volcano Guitar Works.
Author:  alan stassforth [ Mon Jan 31, 2011 8:35 pm ]
Post subject:  Re: Weissenborn set
If you want a spruce top, Shane at High Mtn tonewoods has Lutz spruce tops for Weiss.
I like spruce for the top, personally.
After I use up my 2 sets of blackwood and yellow siris, I'm going to try the Shane Lutz,
with whatever I can find for the rest of da box.
Author:  slidinbob [ Tue Feb 01, 2011 4:07 am ]
Post subject:  Re: Weissenborn set
Thanks guys! I know VGW, I usually bought from him, but now seems to have nothing available ...

I personally prefer to use hawaiian koa for the TA, on the other hand if you want to try Italian spruce, I've a little stash for both acoustic and weiss.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/