| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Mini flex mic Model 1 - What diameter hole to drill? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=30799 |
Page 1 of 1 |
| Author: | GregG [ Sat Jan 22, 2011 10:44 am ] |
| Post subject: | Mini flex mic Model 1 - What diameter hole to drill? |
Hello All, I'm going to install one of these "Mini flex mic Model 1" - Just want to make sure I have the proper hole diameter drilled and for the life of me I can't seem to find that info from the manf. website.....anyone have any thoughts? Thanks, Greg |
|
| Author: | woody b [ Sat Jan 22, 2011 11:14 am ] |
| Post subject: | Re: Mini flex mic Model 1 - What diameter hole to drill? |
I removed one and replaced it with a Dtar a while back. It had a standard 1/2" hole. |
|
| Author: | GregG [ Sun Jan 23, 2011 11:42 am ] |
| Post subject: | Re: Mini flex mic Model 1 - What diameter hole to drill? |
Thanks Woody. Greg |
|
| Author: | dberkowitz [ Mon Jan 24, 2011 12:07 pm ] |
| Post subject: | Re: Mini flex mic Model 1 - What diameter hole to drill? |
I'd wait and measure it. I recently installed a B-Band for a client. The manual said 1/2" but it really wanted 15/32". |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|