Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
Trademark/logo registration http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=29658 |
Page 1 of 1 |
Author: | jsmith [ Tue Oct 26, 2010 3:12 pm ] |
Post subject: | Trademark/logo registration |
How many of you building pros, or semi-pros have your trademarks or logos (same thing?) registered? What are the steps you take to dow so. I imagine it has to do with the US patent office. |
Author: | John A [ Tue Oct 26, 2010 3:28 pm ] |
Post subject: | Re: Trademark/logo registration |
http://www.registeringatrademark.com/how-to-trademark-a-logo.shtml |
Author: | SteveCourtright [ Tue Oct 26, 2010 4:25 pm ] |
Post subject: | Re: Trademark/logo registration |
This is actually something you can do without an attorney, although in the end you might wish you had hired a Trademark Attorney. Go to http://www.uspto.gov and read up on the process. It can be tricky, but it can be done by any competent person. BTW, a trademark can be a number of things, like a word, or a design/symbol or a combination thereof. Most marks are just a word or words. |
Author: | jsmith [ Tue Oct 26, 2010 4:42 pm ] |
Post subject: | Re: Trademark/logo registration |
Thank you both. Steve, your suggestion sounded plausible till I ran across your phrase "competent person". I might be just a couple of VOC's past that qualification. Thanks again, gentlemen. |
Author: | SteveCourtright [ Tue Oct 26, 2010 5:07 pm ] |
Post subject: | Re: Trademark/logo registration |
![]() Seriously, if you can read and write a bit, you can do this. I write patents for a living - if any of my teachers, especially my English teachers learned this, I would be obliged to visit them in the hospital afterward (after the shock wore off)... |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |