Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Latest Rosette
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=16674
Page 1 of 1

Author:  Ken Franklin [ Tue Apr 01, 2008 12:43 am ]
Post subject:  Latest Rosette

Here is my latest rosette. It's walnut, granadillo, maple and black stained veneer. I have a tut in the Tutorial Forum if you are interested.

Author:  JimWomack [ Tue Apr 01, 2008 6:19 am ]
Post subject:  Re: Latest Rosette

Wow Ken, nicely done. I like it a lot. [clap]

Author:  Hesh [ Tue Apr 01, 2008 7:07 am ]
Post subject:  Re: Latest Rosette

Very nicely done Ken [:Y:] [clap] [clap] [clap] [clap]

Author:  Mark L. [ Tue Apr 01, 2008 10:07 am ]
Post subject:  Re: Latest Rosette

Ken,

Man oh' man, what can ya say, that is truly a work of art! Superb craftsmanship! [:Y:]

Author:  WaddyThomson [ Tue Apr 01, 2008 10:08 am ]
Post subject:  Re: Latest Rosette

That's really nice, Ken!

Author:  Steve Kinnaird [ Tue Apr 01, 2008 11:23 am ]
Post subject:  Re: Latest Rosette

Wow! More artwork to inspire.
Thanks for posting,

Steve

Author:  Bruce Dickey [ Tue Apr 01, 2008 1:04 pm ]
Post subject:  Re: Latest Rosette

Image

Worth repeating, nice job on the rosette. [clap]

Author:  Brock Poling [ Tue Apr 01, 2008 8:12 pm ]
Post subject:  Re: Latest Rosette

That is really nice Ken.

Author:  Ken Franklin [ Wed Apr 02, 2008 9:34 am ]
Post subject:  Re: Latest Rosette

Thanks for the kind words everyone.

Author:  Anthony Z [ Wed Apr 02, 2008 9:51 am ]
Post subject:  Re: Latest Rosette

Major Wow factor there! [:Y:]

Author:  John How [ Wed Apr 02, 2008 12:55 pm ]
Post subject:  Re: Latest Rosette

Very nice rosette Ken, very nice!!!

Author:  LanceK [ Wed Apr 02, 2008 1:43 pm ]
Post subject:  Re: Latest Rosette

Very nice Ken!
Id love to get a closer look in Miami! ;)

Author:  Don Williams [ Wed Apr 02, 2008 1:45 pm ]
Post subject:  Re: Latest Rosette

Very cool !

Author:  Mike Collins [ Wed Apr 02, 2008 4:03 pm ]
Post subject:  Re: Latest Rosette

Nice [:Y:]
Can the pieces be reversed so they point out?

Mike

Author:  Dave Fifield [ Wed Apr 02, 2008 4:15 pm ]
Post subject:  Re: Latest Rosette

Nice one Ken! I'm curious as to your method....guess I'll have to go find your tutorial [:Y:]

Dave F.

Author:  Ken Franklin [ Thu Apr 03, 2008 2:30 am ]
Post subject:  Re: Latest Rosette

Lance, I'm not going to Miami but I'll see you at Montreal. Probably won't have this one since it's a commission.

Mike, you could certainly turn the pieces around as long as you didn't taper them to fit this way first.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/