Official Luthiers Forum! :: View topic - ??Best Plane and/or Planes for Thicknessing tonewoods

Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/

??Best Plane and/or Planes for Thicknessing tonewoods http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=16247	Page 1 of 1

Author:	Chris aka Sniggly [ Tue Mar 04, 2008 9:04 pm ]
Post subject:	??Best Plane and/or Planes for Thicknessing tonewoods
Hey Yalll...... So what do you think? I know for a fact that some folks are going to chime in with the Lie Nielsen stuff, and I agree.... Anyone ever heard of Steve Knight Toolworks? I currently have and use one of his small block planes and I would fight someone to keep it.

Author:	Lillian F-W [ Tue Mar 04, 2008 10:15 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
I had two of Steve's planes. I loved them, but my hands aren't large enough to be comfortable using them. My step-son loves them now.

Author:	ecklesweb [ Tue Mar 04, 2008 11:53 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
Stanley Bedrock #604. Bailey #4 will do just as well, the frog on the Bedrock just looks easier to adjust (all of mine are Bailey patterns, never actually owned a Bedrock). 604 seems to go for $100-$150 on ebay.

Author:	Bruce Dickey [ Wed Mar 05, 2008 12:32 am ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
General International 25" Abrasive Planer

Author:	Chris aka Sniggly [ Wed Mar 05, 2008 9:02 am ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
Bruce...it must be somewhat difficult to pick that big sander up and run it across a set of backs and sides..... Todd...that 4 1/2 with the 55 degree frog....Are there any woods you have had trouble with? I was considering a plane with a 60 degree frog. BTW...I can send you pics of a knight plane taking shavings at .002...but it's not one of his larger planes. They are pretty much a set and forget type of tool....that is until you have to take the iron out to sharpen it.

Author:	boboreilly [ Wed Mar 05, 2008 2:40 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
Just a public service announcement, but Steve Knight was just asked to stop selling his planes on a very large woodworking forum because he was unable to afford shipping a dozen or more planes that were already paid for (with shipping included). He makes nice stuff, but proceed with caution. Here is the thread that details his problems. http://www.forums.woodnet.net/ubbthread ... t=all&vc=1 I don't have a dog in this hunt, just letting everyone know so they can make their own choice.

Author:	Chris aka Sniggly [ Wed Mar 05, 2008 4:08 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
Dang....I feel for him. My wife and I own a landscaping and lawn servicing company here in Jacksonville....and while I feel for him...I have borrowed from peter AND paul to 'make it right' for my client's. The one plane I have from him is a magical piece...but I don't want him to drown with my money in his pocket. If he can recover...it'll pop up. I went to he local Woodcraft today to see if they had a Lie 4 1/2 with no luck. I'll have to do some web hunting.

Author:	WaddyThomson [ Wed Mar 05, 2008 5:28 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
Todd probably knows more about this, but I was looking at their site, and you can get the 4 1/2 of your choice if you buy direct. You'll pay, maybe $15 more, but you don't have to buy an extra 55* frog @ $75.00. Most of the woodworking places have them with a 45* frog, and offer the other frogs as extras. At least that's what I've found.

Author:	TonyFrancis [ Wed Mar 05, 2008 6:19 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
-

Author:	ecklesweb [ Wed Mar 05, 2008 7:23 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
boboreilly wrote: Here is the thread that details his problems. http://www.forums.woodnet.net/ubbthread ... t=all&vc=1 I've got to hand it to the woodnet folks, that was a reasonably civil thread that could have easily degenerated into a flamewar. I somehow haven't run across that forum before - I'm impressed.

Author:	TonyFrancis [ Thu Mar 06, 2008 6:11 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
-

Author:	TonyFrancis [ Fri Mar 07, 2008 12:44 am ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
-

Author:	charliewood [ Fri Mar 07, 2008 2:19 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
Im not nearly experienced enough with handtools to comment on what would be the "best" plane...(for anything) But there is a special feeling when you pick up a sweet plane like a LN #7 or #8.. (any LN) its just such a nice tool... no doubt! my #7 I would have gotten a #8 if I wasnt in a wheelchair.... you never know when an extra 2"might come in handy! After messing with a (newer) Stanley #5, which was my first plane, theres just no comparison My initial experiments would indicate thateven my #4 LN does a great job thicknessing too.. so I can see why alot of people just use them for joining tops and backs, leveling headstocks after gluing up the neck, and other such.. Cheers Charlie

Author:	Guest [ Sat Mar 08, 2008 4:12 am ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
A number 5 or 5 1/2 is a good all-rounder; I have two -an old Stanley that's ded (dropped it, nose broke off) and a 5 1/2 Record that works just wonderfully. Also have a #6 Union that's a nice, old tool. Both were cleaned up and tuned by a local handtool collector/salesman. Lie Nielsens are defitinely worth the money they cost, and if I needed a new one, I'd buy one, because I'd rather build than spend time rebuilding old tools. Have a LN low angle block that's lovely, and 150 euros to spend in gift certificates at a shop that stocks LN planes, so I may get a 100 or 102. I also have a 22" purpleheart Steve Knight jointer, which is a lovely, fantastic tool, just the right heft and mass to do a good job jointing. Those long tools in steel can be a little unwieldy.

Author:	Glenn LaSalle [ Sat Mar 08, 2008 11:53 am ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
I see LN makes a #4 with 50 degree HA Frog. Any opinions on this plane for difficult woods? Thx Glenn

Author:	ecklesweb [ Sat Mar 08, 2008 12:12 pm ]
Post subject:	Re: ??Best Plane and/or Planes for Thicknessing tonewoods
fmorelli wrote: This guy is honest and forthcoming, and has made some unfortunate mistakes - that's an opportunity for compassion and lending a hand. I started to reply to this, but it's getting off topic.

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/