Stew-Mac has black rattle can nitro.....
| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| Source for solid color aerosol nitro? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=16069 |
Page 1 of 1 |
| Author: | DYeager [ Sun Feb 24, 2008 11:19 am ] |
| Post subject: | Source for solid color aerosol nitro? |
Only one source seems to show on the net. Dan |
|
| Author: | Hesh [ Sun Feb 24, 2008 11:34 am ] |
| Post subject: | Re: Source for solid color aerosol nitro? |
Stew-Mac has black rattle can nitro.....
|
|
| Author: | JJ Donohue [ Sun Feb 24, 2008 11:45 am ] |
| Post subject: | Re: Source for solid color aerosol nitro? |
Guitar Reranch http://reranch.com/products.htm |
|
| Author: | DYeager [ Sun Feb 24, 2008 11:54 am ] |
| Post subject: | Re: Source for solid color aerosol nitro? |
Thanks, guys. Reranch was the source I found, and, actually, a Chinese company offering custom can filling under "motorcycle colors", which looked a little far afield. Not to complicate this thread, but has anyone sprayed clear nitro over acrylic lac or acrylic enamel, or any automotive touchup colors? Oh, for the old days ('70s & '80s) when you could look at a huge collection of color chips and the body and fender (!) supply would mix it. Dan |
|
| Author: | Billy T [ Sun Feb 24, 2008 5:24 pm ] |
| Post subject: | Re: Source for solid color aerosol nitro? |
I used to get Ditzler from one of 2 local auto paint shops! Excellent stuff! I have'nt been there in years though. |
|
| Author: | DYeager [ Sun Feb 24, 2008 6:57 pm ] |
| Post subject: | Re: Source for solid color aerosol nitro? |
Thanks, Billy I plan to hit my local auto paint supplier first thing tomorrow, but I'm losing heart - with nitro in such bad odor, it ain't looking good. I'm going to start experimenting with things like Krylon under acrylic. Yikes. Dan |
|
| Author: | Jeff Highland [ Sun Feb 24, 2008 7:03 pm ] |
| Post subject: | Re: Source for solid color aerosol nitro? |
Acrylic lacquer works just fine under nitro clear |
|
| Author: | RichB [ Sun Feb 24, 2008 7:17 pm ] |
| Post subject: | Re: Source for solid color aerosol nitro? |
I'm not sure what color you're looking for but Mohawk has a complete line of lacquers & wood finishing products.... http://www.mohawk-finishing.com/mhk_cds ... t%2007.pdf (pg. 4 for colored lacquers) http://www.mohawk-finishing.com/catalog ... ictNbr=460 I've bought some Toners, Clears & a Flow-out through Pond Cove ... http://www.pondcovepaint.com/content/pa ... namel.html |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|