| Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
| purfling cutter http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=16006 |
Page 1 of 1 |
| Author: | bolix [ Wed Feb 20, 2008 3:04 pm ] |
| Post subject: | purfling cutter |
hi! Does anyone has build an homemade binding channel cutter? and... how? thank you |
|
| Author: | Ray Pepalis [ Wed Feb 20, 2008 3:42 pm ] |
| Post subject: | Re: purfling cutter |
I built this router fixture using plans from LMI, and it works very well. Ray[img][/img] |
|
| Author: | bolix [ Thu Feb 21, 2008 8:42 am ] |
| Post subject: | Re: purfling cutter |
sorry.. i was thinking about an handheld binding/purfling channel.. thank you |
|
| Author: | WaddyThomson [ Thu Feb 21, 2008 10:41 am ] |
| Post subject: | Re: purfling cutter |
It may not suit what you are wishing to do, but see my Circle/Purfling Cutter Tutorial. I recently used it to cut my binding edges and mark my purfling channels. It does not remove the part where you have to use a chisel to remove the waste, though. I don't know of any hand cutters that do the whole job. If you think this is what you are interested in making, I have made a couple of modifications that might be of interest to you. One is the scraper type blade that I posted within the last week. Look up that thread. If you want to see how it works, see my thread on Cutting for Bindings and Purflings - Waddy's First Guitar. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|