Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Tutorials
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=15970
Page 1 of 1

Author:  JJ Donohue [ Mon Feb 18, 2008 2:38 pm ]
Post subject:  Tutorials

Where are they?... and can they be permanantly linked on the forum site?

Author:  burbank [ Mon Feb 18, 2008 2:45 pm ]
Post subject:  Re: Tutorials

JJ,
I think Bob Connor posted recently here on the new forum about them. Seems all the links were broken, IIRC. Seems Brock or Lance posted about fixing that, though I don't know how high up it is on the priority list. HTH.

Author:  WaddyThomson [ Mon Feb 18, 2008 2:53 pm ]
Post subject:  Re: Tutorials

Many have been fixed, but some, Hesh's, Paul's, and a few others are, somehow, not available because the User Names have either been deleted, or changed. Screwed up the database, I guess. Here is the link to the Page with the links. The ones that say fixed are fixed. The others don't work, or have not been found. If you find one, post it or PM Bob Connor with it, and he'll fix the link.

OLF Tutorial Page

Author:  JJ Donohue [ Mon Feb 18, 2008 3:00 pm ]
Post subject:  Re: Tutorials

Thanks, Waddy!

Unfortunately the tute I was looking for is broken. Does anyone know when they will become operational? Thanks

Author:  Brock Poling [ Mon Feb 18, 2008 3:09 pm ]
Post subject:  Re: Tutorials

Dunno... but it is on the list.

A lot of the paths have changed and that is why they no longer work. We need to figure out how to identify and repair these en masse.

It is on the list of stuff to do though.

Author:  WaddyThomson [ Mon Feb 18, 2008 3:10 pm ]
Post subject:  Re: Tutorials

Which one JJ?

Author:  JJ Donohue [ Mon Feb 18, 2008 3:16 pm ]
Post subject:  Re: Tutorials

WaddyT wrote:
Which one JJ?


Paul Woolson's tutotial on "12-String Nut Setup"

Author:  WaddyThomson [ Mon Feb 18, 2008 3:52 pm ]
Post subject:  Re: Tutorials

Yep, you'll be able to find the thread, but his entries will not be there, only the responses. No pictures either.

Author:  bob_connor [ Mon Feb 18, 2008 4:02 pm ]
Post subject:  Re: Tutorials

I'm still working on fixing the links but unfortunately it's a one at a time search and replace operation as I think the new software has re-indexed the database, giving each thread a new unique ID in the phpbb database, which makes it impossible to do en masse.

At last count there were around 60 links tutorials. Once I've found them all maybe Lance or Brock can move them into the tutorial section of the new forum.

Some of them I haven't been able to find. :cry:

Bob

Author:  WaddyThomson [ Mon Feb 18, 2008 4:09 pm ]
Post subject:  Re: Tutorials

This might be a good point. Maybe things like this, that should be available for posterity, shouldn't be indexed by User Name. A better index could be numerical or title, or something like that, that would not change if someone leaves.

Author:  Lillian F-W [ Tue Feb 19, 2008 7:33 am ]
Post subject:  Hey JJ

Here you go JJ.

http://luthiersforum.3element.com/forum ... 3269&PN=1##193475

Author:  JJ Donohue [ Tue Feb 19, 2008 7:52 am ]
Post subject:  Re: Hey JJ

Aoibeann wrote:


Thank you so much Lillian. I can only hope that we finally can save all of these valuable tutes in a proiminent and accessable location. You and Bob have now gotten us closer to that goal. [clap] [clap] [clap]

Author:  LanceK [ Tue Feb 19, 2008 8:44 am ]
Post subject:  Re: Tutorials

bob_connor wrote:

At last count there were around 60 links tutorials. Once I've found them all maybe Lance or Brock can move them into the tutorial section of the new forum.

Bob


Bobo youve read my mind [:Y:]

Author:  WaddyThomson [ Tue Feb 19, 2008 11:45 am ]
Post subject:  Re: Tutorials

For what it's worth here are a few more links for making repairs.

Harvesting and Processing Spruce - Shane Neifer

Part I - viewtopic.php?f=10102&t=4096&p=43017&hilit=+spruce+processing#p43017

Part II - viewtopic.php?f=10102&t=4119&p=43425&hilit=+spruce+processing#p43425

Part III - viewtopic.php?f=10102&t=8316&p=109803&hilit=+spruce+processing#p109803

X Brace Tutorial - Lance Kragenbrink - viewtopic.php?f=10117&t=15971&p=228192&hilit=+braces#p228192

Micro Plane Building Tutorial - Chris Verhoeven - viewtopic.php?f=10102&t=13157&p=184463&hilit=planes#p184463

Full Body Template, One Method - Todd Stock - viewtopic.php?f=10102&t=14126&hilit=Full+body+template

Outside Molds, One Method - Todd Stock - viewtopic.php?f=10102&t=14138&hilit=Full+body+template

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/