Official Luthiers Forum!
http://mowrystrings.luthiersforum.com/forum/

Neck resets in London
http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=15609
Page 1 of 1

Author:  Evan Gluck [ Tue Jan 29, 2008 8:32 pm ]
Post subject:  Neck resets in London

One of my clients is moving back to London next week and asked me for a referral
to someone in there who will do a neck reset on his Hofner archtop.
Any ideas would be most welcome.
Best, Evan

Author:  Tim McKnight [ Tue Jan 29, 2008 8:38 pm ]
Post subject:  Re: Neck resets in London

Colin is in the UK but not quite sure where.

Author:  Dave White [ Wed Jan 30, 2008 2:53 am ]
Post subject:  Re: Neck resets in London

Evan,

Dave King has a great reputation. His repair workshop is in Denmark Street, London so your client can visit all the guitar shops when they drop it off :D

Details are here.

Author:  Colin S [ Wed Jan 30, 2008 3:54 am ]
Post subject:  Re: Neck resets in London

Yes, another vote here for Dave King. Look no further.

Colin

Author:  Evan Gluck [ Wed Jan 30, 2008 9:47 am ]
Post subject:  Re: Neck resets in London

Thanks so much guys, I should have thought of Dave as I have read numerous articles by him.
Best, Evan

Author:  Guest [ Wed Jan 30, 2008 10:25 am ]
Post subject:  Re: Neck resets in London

i'm in Manchester UK but I'm reasonably familiar with hofner neck-sets, little too far to come for that alone though possibly!
The last one I did had divots in the fingerboard you could plant potatoes in, and a neck that you could throw across a room and watch it come back to you! All came good in the end though after a re-fret etc.
I even made some feedback busters for the f-holes so it could be used on stage.
Strange neck joint on those things, amazing to think they hold as long as they do!

Author:  curtis [ Wed Jan 30, 2008 10:30 am ]
Post subject:  Re: Neck resets in London

Guest wrote:
i'm in Manchester UK but I'm reasonably familiar with hofner neck-sets, little too far to come for that alone though possibly!
The last one I did had divots in the fingerboard you could plant potatoes in, and a neck that you could throw across a room and watch it come back to you! All came good in the end though after a re-fret etc.
I even made some feedback busters for the f-holes so it could be used on stage.
Strange neck joint on those things, amazing to think they hold as long as they do!


Appologies - i thought I was logged in, it came up as 'guest' though. My names Steve Curtis, I run a repair/ build shop in Manchester UK. Our websites still in its early days - too busy with repairs!

http://www.ccguitars.co.uk

all the best,
steve

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/