Official Luthiers Forum! http://mowrystrings.luthiersforum.com/forum/ |
|
Can UV light speed a Nitro Cellulose cure? http://mowrystrings.luthiersforum.com/forum/viewtopic.php?f=10101&t=15459 |
Page 1 of 1 |
Author: | Stefan [ Tue Jan 22, 2008 2:10 pm ] |
Post subject: | Can UV light speed a Nitro Cellulose cure? |
I seem to remember somebody posting something about using uv lamps to cure nitro. I can't find it though. Is it so? Stefan |
Author: | Michael Dale Payne [ Tue Jan 22, 2008 3:00 pm ] |
Post subject: | Re: Can UV light speed a Nitro Cellulose cure? |
I believe you are thinking of using IR light not UV. |
Author: | Waddy [ Tue Jan 22, 2008 3:05 pm ] |
Post subject: | Re: Can UV light speed a Nitro Cellulose cure? |
Michael, your typing has improved! |
Author: | Michael Dale Payne [ Tue Jan 22, 2008 3:08 pm ] |
Post subject: | Re: Can UV light speed a Nitro Cellulose cure? |
Waddy wrote: Michael, your typing has improved! it is a figment of your imagination That and I cleand my keyboard |
Author: | WaddyThomson [ Tue Jan 22, 2008 3:37 pm ] |
Post subject: | Re: Can UV light speed a Nitro Cellulose cure? |
That could really have a lot to do with it. Boy you must have been really bored when the system was down. Cleaned you keyboard. That's the peak of boredom, unless you're Hesh! |
Author: | Michael Dale Payne [ Tue Jan 22, 2008 4:08 pm ] |
Post subject: | Re: Can UV light speed a Nitro Cellulose cure? |
Anyway Stefan to the best of my knowledge nitro is not a UV curable as it is a flashing cure needing to evaporate the solvent to cure. Heat can help there ie IR lights. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |