***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 30, 2024 1:53 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
SnowManSnow
PostPosted: Sun Mar 03, 2019 3:50 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
So I’ve done ports with a reinforcement where I’ve basically laminated that area, but what would be the downside in reinforcing it with epoxy and a fiberglass mesh?


Sent from my iPhone using Tapatalk
Top
 Profile  
 
meddlingfool
PostPosted: Sun Mar 03, 2019 3:52 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7380
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Uglieness?


These users thanked the author meddlingfool for the post: SnowManSnow (Sun Mar 03, 2019 7:45 pm)
Top
 Profile  
 
Mark Mc
PostPosted: Sun Mar 03, 2019 4:16 pm 
Offline
Koa
Koa

Joined: Sun Apr 25, 2010 4:46 pm
Posts: 527
First name: Mark
Last Name: McLean
City: Sydney
State: New South Wales
Zip/Postal Code: 2145
Country: Australia
Focus: Build
Status: Amateur
Probably lots of ways to skin that cat. I have seen guitars that just had a hole drilled in the side without any reinforcement and it worked fine. CF plastered on the inside with epoxy would help prevent cracks from originating at the hole. But I agree with Ed that it might not be the best look. I laminate a piece of side cut-off, bent to fit, to make a cross-grain patch inside. It can look good if you sandwich a contrasting veneer in the middle which gets revealed as a ring at the opening, and can tie into your purfling scheme. Binding the hole looks classy too, and affords extra protection to the rim.
Top
 Profile  
 
muse
PostPosted: Mon Mar 04, 2019 12:16 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Mar 15, 2011 1:51 am
Posts: 54
Focus: Build
Status: Amateur
Mark Mc wrote:
Probably lots of ways to skin that cat. I have seen guitars that just had a hole drilled in the side without any reinforcement and it worked fine. CF plastered on the inside with epoxy would help prevent cracks from originating at the hole. But I agree with Ed that it might not be the best look. I laminate a piece of side cut-off, bent to fit, to make a cross-grain patch inside. It can look good if you sandwich a contrasting veneer in the middle which gets revealed as a ring at the opening, and can tie into your purfling scheme. Binding the hole looks classy too, and affords extra protection to the rim.


What Mark Mc said... [:Y:]
Top
 Profile  
 
Pat Foster
PostPosted: Mon Mar 04, 2019 10:37 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2375
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
I'd prefer cut out a soundport backed with just about any wood rather than fiberglass.

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com
Top
 Profile  
 
Linus
PostPosted: Mon Mar 04, 2019 8:49 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Dec 23, 2011 10:17 am
Posts: 292
First name: Linus
City: Brooklyn
State: NY
Zip/Postal Code: 11215
Country: USA
Focus: Build
Status: Amateur
If you are binding the hole no one will notice. If they go looking inside with a mirror they will see it so if you choose that route, just do a clean job of it.

I laminate cross grained wood and bind the hole. It looks good and works well.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 54 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com