Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 6:27 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject:
PostPosted: Wed Jan 16, 2008 2:19 pm 
Offline
Koa
Koa

Joined: Wed Jan 05, 2005 10:43 pm
Posts: 1124
Location: Australia
First name: Paul
Last Name: Burns
City: Forster
State: NSW
Zip/Postal Code: 2428
Country: Australia
Focus: Build
Status: Amateur
I'm going to build a 5 string flat top bass for my nephew.

Most of the high end acoustic basses on the market have EIR back & sides and a cedar top. Seems that this combo gives the best results.

Problem is; I'm allergic to western red cedar. So I'm thinking of using redwood instead. Anybody who built one see any problems with this?

Anything else you feel I should know before I start?

Thanks,

Paul


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 2:39 pm 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
You're allegic to WRC and not to redwood? Well, you will be soon enough...   Go with spruce.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 2:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
Skip the fifth string.

Others who know more that I will likely chime in.

Acoustically it just won't be heard sonically.

If it's going to be electric, then well, whatcha waiting on?

I want to build a four string now. Folks coached me about this. I've had a five string acoustic in my shop and that was the owner's complaint too, couldn't hear the lowest heavy string.

That was compounded by the fact the piezo element wasn't long enough, so scoot it either way and you'd lose the high, the other way you'd lose the lowest in the pickup, we trashed the UST and put in some K and K's, sounds great now plugged in. Unplug it and well, she's mighty quiet on the low fifth string.....

Good luck, great project, someone will love your lowdown bass.....

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 2:44 pm 
Offline
Koa
Koa

Joined: Wed Jan 05, 2005 10:43 pm
Posts: 1124
Location: Australia
First name: Paul
Last Name: Burns
City: Forster
State: NSW
Zip/Postal Code: 2428
Country: Australia
Focus: Build
Status: Amateur
Never used redwood before so I'm hoping I'll be ok with it if I use a mask and limit my exposure.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 4:26 pm 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
I've known a couple of carpenters here in California who had to find other lines of work once their redwood allergies kicked in. It's got the same kind of oils that Western Red Cedar has...the ones that make the mature heartwood quite rot and insect resistant.   And lung resistant for humans... Also, the stuff just doesn't break down easily, either in the ground or in your body.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 17, 2008 10:00 am 
Offline
Koa
Koa

Joined: Wed Jan 05, 2005 10:43 pm
Posts: 1124
Location: Australia
First name: Paul
Last Name: Burns
City: Forster
State: NSW
Zip/Postal Code: 2428
Country: Australia
Focus: Build
Status: Amateur
Well, alleric or not I'm building this bass with a cedar or redwood top unless someone tells me the redwood is unsuitable. I have three 3M belt mounted powered air purifying respirators in the lab at work, purchased by my predecessor and have never been used - no need for them with all the other systems in place. I can take one home and use that.

Bruce, I'd prefer to build a 4 string, but the kid wants a 5 string. I'm planning on putting in a piezo and an EQ for the reasons you mentioned. Breedlove are putting in piezo pickups in their 5 string basses, so there must be some out there that are long enough.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 17, 2008 10:28 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Nov 16, 2006 9:19 am
Posts: 163
There is a special name for lung disease from inhaling redwood dust, just as there are for many other dusts, e.g., coal (Black Lung), silica (silicosis), etc. I am allergic to just about everything, and have asthma. I plan to start wearing a hood with supplied, filtered air and be careful not to track dust into the house. I have a shop annexed to the attached garage. For the shop, I have dedicated heat and airconditioning, rather than run ducts from the house. I think the personal air hood is the minimum you should have. Those little dust masks just don't do a good enough job for someone who is sensitive to the dust.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 66 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com